“Steamless” structure not to let steam out

The steam-catcher structure* that allows steam to turn into water droplets and return into the water boiler, preventing steam from being let out.
The structure eliminates the risk of getting scalded by accidental exposure to hot steam.

*Mechanism of the steam-catcher structure

[1] The steamless feature sensor to detect boiling water is incorporated.
The generation of steam when water boils is detected immediately to minimize further creating steam needlessly.

[2] The steam generated during boiling enters from the draw-in entrance and is caught in the steam catcher incorporated into the lid.

[3] The steam is cooled while passing through the cooling passage in the steam catcher.

[4] The cooled steam condenses and turns into water droplets, and then returns into the inner container through the passage.

Two-level dispense volume selection “Large volume & slow dispensing”

The dispense volume can be switched between the quick “large-volume dispensing” for cooking and the “slow dispensing” for pouring a small amount of hot water slowly to make an instant soup or a cup of tea. You can select either of the dispense volume levels depending on your purpose.

“Cordless air dispensing” for a wider variety of uses

When the water boiler is plugged in, the electric-powered dispensing mechanism works so that you can dispense hot water with one finger.
Even if the water boiler is unplugged in a place where there is no power source, the air dispensing mechanism works so that you can dispense hot water.

“Power-saving VE insulation” for boiling plenty of water and keeping it warm with VE insulation

The high-vacuum, double-walled bottle (VE bottle structure/stainless steel) container has a reliable structure that allows the hot water inside to be kept warm even after the product is unplugged. The hot water is kept at about at least 90°C* even 2 hours after the product is unplugged! The product is very energy efficient and power-cheap-to-use.
VE is an abbreviation of vacuum electric.

*The hot water in the product gets cold as time passes after it is unplugged.

Water level gauge with a wide window and red ball to clearly show the remaining hot water level

The water level is indicated by a floating red ball in the water level gauge, allowing you to see the remaining water level at a glance.

Safe and secure design

[Prevention of empty burning]

The water boiler detects when it boils dry and shuts off automatically.

[Electric-powered dispensing with auto-lock function]

The water boiler is automatically locked a while after dispensing. (Air dispensing is manually operated)

[Tilt lock function]*1

Hot water spillage is minimized if the product is tilted.

[Lock function]*1

Hot water spillage is minimized if the product tips over.

*1 Note
[For electric-powered dispensing] Even when the operation keys are in the locked state (dispensing function is disabled), tilting or tipping over the main body may cause hot water to come out from the spout or steam vent, resulting in a scald.
[For air dispensing] Even when the dispense button stopper is in the locked state (dispensing function is disabled), tilting or tipping over the main body may cause the hot water to come out from the spout or steam vent, resulting in a scald.